Instructions on how to install a direct water heater

Installation tools

You need to prepare some of the following tools and supplies to install a direct water heater.

1. Water heater accessories are available with purchase

Toàn bộ máy và phụ kiện kèm theo khi mua

The whole machine and accessories are included with the purchase

2. The materials need to prepare to install the machine (Dien May GREEN supports the preparation for customers)

Các vật tư cần chuẩn bị để lắp máy

Materials needed to prepare the machine

  • Water supply cable.
  • Single-phase electrical circuit breakers 20A or 30A.
  • Daphaco electric wire.
  • Need to buy more flexible hose to fill water into the machine.
  • Installation tools include pencil, electric tester, screwdriver, ruler, wrench, wire cutter and drill.

Steps to take

Step 1: Use a screwdriver to remove the mask of the water heater.

Tháo mặt nạ của máy nước nóng ra

Remove the mask of the water heater

Use a screwdriver to remove the screws to remove the front panel of the water heater, being careful to use the correct type of screwdriver so as not to damage the unit.

Máy nước nóng được tháo mặt nạ ra

The water heater is removed from the mask

Step 2: Put the machine on the wall, use a ruler to make sure the machine is lying flat. Use a pencil to mark the hanger and the holes along the back of the machine.

Dùng thước đặt máy ngay ngắn rồi đánh dấu bằng bút chì

Use a ruler to place the machine neatly and then mark it with a pencil

Take the machine out of position and start drilling holes, close the stopper and then place the machine so that the available holes are aligned with the position of the stopper, tighten the screws.

Bắt vít gắn máy lên tường

Screw the machine to the wall

Step 3: Locate the location to install the shower faucet and CB. Select the appropriate position and then mark the hole with a pencil through the holes on the slider, then proceed to fix the slide position on the wall, screw the screw to complete the installation of the accessory.

Định vị vị trí lắp sen vòi và CB

Determine the location of the shower faucet and CB

Mount the CB on the wall.

Gắn CB lên tường

Mount the CB on the wall

Next, proceed to install the shower on the wall.

Lắp vòi sen lên tường

Mount the shower on the wall

Tighten the faucet fixing screw.

Xiết vít cố định vòi sen

Tighten the showerhead fixing screw

Step 4: We proceed to install the 3-in-1 valve and the water inlet on the right side of the machine. Use a wrench to turn the valve in and then remove the warning stickers attached to the top of the valve, taking care not to drop the loose mesh, the rubber gasket at the top of the valve.

Lưu ý không làm rơi lưới lỏng, gioăng cao su tại đầu van

Take care not to drop the loose mesh, rubber gasket at the valve head

Install the 3-in-1 valve and water inlet on the right side of the machine.

Gắn van 3 trong 1 và tháo miếng dán

Attach the 3-in-1 valve and remove the sticker

Connect the valve end to the water line, the other end to the water supply line. Twist with moderate force so as not to damage the connector.

Dùng ống nhựa nối van 3 trong 1 với van cấp nước

Use a plastic pipe to connect the 3-in-1 valve to the water supply valve

Connect the shower arm to the water outlet on the left front left side of the water heater.

Kết nối tay sen vào đường nước ra

Connect the hand shower to the water outlet

Step 5: Connect the power to the machine

Install the phase wire, neutral wire and ground wire of the machine into the contacts. Make sure the wires are connected correctly and securely.

Kết nối dây điện vào tiếp điểm

Connect the wire to the contact

Connect the machine to the previously mounted CB.

Đấu nối máy với CB đã gắn trước đó

Connect the machine to the previously mounted CB

Finally, proceed to install the front panel on the machine, using the correct screws removed in the first steps. Remove the scratch-resistant screen on the front and then insert the adjustment buttons, need to check if the adjustment buttons fit properly.

Lắp mặt trước máy và lắp núm điều khiển vào

Install the front of the machine and insert the control knob

Installation of the water heater is complete.

Lắp đặt máy nước nóng hoàn tất[

Installation of water heater completed

Step 6: Conduct ground / ground connection for the machine to avoid electric leakage causing danger to users.

Check the machine's operating functions and guide customers to use

Step 1: Check if the ELCB anti-shock CB & other functions on the machine work or not.

Kiểm tra CB chống giật ELCB trên máy có hoạt động hay không

Check if the ELCB anti-shock CB on the machine is working or not

Step 2: Instruct customers to use the machine's function buttons.

Hướng dẫn khách hàng sử dụng các nút chức năng của máy

Guide customers to use the function buttons of the machine

The installation of the direct water heater is completed.

Hopefully the article has provided you with useful information to install a water heater quickly and efficiently. Please leave a comment for Dien May XANH in the box below!

Article using Ariston IM-4522EP water heater 4.5kW

The post https://meo.tips/using/instructions-on-how-to-install-a-direct-water-heater/ appeared first on Meo.tips.

View more from Meo.tips:

The West has a strange fruit with a bad skin but an unforgettable taste
How many clothes should be put in the washing machine? The easiest way to estimate the volume of dry clothes
How to make a unique and impressive paper flower as a gift on March 8
Good tips to use betel leaves to treat underarm odor, both cheap and effective
7 reusable household items that we often throw away
9 ways to dry sports shoes quickly and effectively
Things to know about energy-saving energy labels when shopping
Getting caught in the rain should not be underestimated
Why should you soak your feet in hot water?
Pocket 7 tips to collect debt gracefully, effectively, smartly and skillfully during Tet holiday
The CEO of Levi's hasn't washed jeans in 10 years, so how often does he wash jeans?
Soak anise with white vinegar, bring many unexpected uses
How to make some homemade hair masks for dry, tangled hair
Treat acne quickly with ingredients available at home
Should I turn on a large or small fan to save electricity?
Meaning of symbols on clothing labels
How to effectively repel flies, ants, cockroaches and some indoor insects
Treat long-standing dark circles with familiar vegetables at home
Poisonous foods you should know
3 ways to make simple, easy-to-follow 3D handmade cards for March 8

Comments

Post a Comment

Popular posts from this blog

The Secret to Greek Women’s Beauty

Image
When it comes to Greece, alongside the mythical stories, the perfect beauty of the Goddess Aphrodite will be the most attractive thing for women. Greek women all possess a healthy and vibrant beauty under the Mediterranean sun. Let’s find out their most whispered beauty secrets to always stay beautiful and radiant in the sun.  1. Sea salt   Greek and ancient Egyptian women both exfoliated with natural sea salt. They mix sea salt with olive oil to create a natural moisturizing mixture. Or use sea salt to gently massage the skin to exfoliate dead cells, remove blackheads and dirt on the skin.  2. Olive oil   This is the most effective “medicine” for beauty from ancient times that still exists today. Greek women mix sugar and salt into olive oil, then use the mixture as an oil moisturizer to moisturize the skin, care for hair and restore sunburned skin.  3. Yogurt   In Greece, yogurt is not only used for eating. You can us...
Read more

Distinguishing and Using Baking Powder, Baking Soda, and Yeast

Image
1. Baking Powder Baking powder is a dry mixture consisting of Bicarbonate Soda, a small amount of starch to keep the other ingredients dry, and one or several acids to generate Carbon Dioxide gas for leavening in baked goods. Almost all baking powders used today are double-acting baking powders, meaning one acid reacts at room temperature when the liquid is added and another acid reacts when heated. Baking powder will lose quality over time, so it needs to be stored in a sealed bag or container in a dry, cool place. To test if baking powder is still good, you can mix ½ teaspoon of baking powder with about 50ml of hot water. If you see bubbles and hear a sizzling sound, it means the baking powder is still good. When baking, many people believe that increasing the amount of baking powder will result in more rising. This is completely wrong. Using too much baking powder will result in a dense and coarse finished product, along with a very unpleasant taste. On the other hand, if you us...
Read more

Don’t immediately throw the stomach into cold water when boiling: Do this extra step to make the stomach white, fragrant, and crispy.

Image
  Selecting a delicious, high-quality stomach To have a delicious, tender, crispy boiled stomach, first of all, you need to choose a good stomach. An average stomach usually weighs from 500-800g. When choosing, you should select ones that are medium-sized but feel heavy when touched, indicating that the stomach is thick and will taste better without being tough. On the contrary, stomachs that look big but feel thin when touched indicate that they will be tough and not crispy-tender. It is not advisable to choose stomachs of this type. Cleaning the stomach before boiling If you have chosen a satisfactory stomach, use salt to rub it to remove the dirt on the surface. The preparation of the stomach is extremely important as it helps eliminate the odor on the stomach and makes your stomach dish much more delicious. Steps to clean the stomach Step 1: First, use a sharp knife to remove excess fat around the stomach, rinse the surface with water. Then, add 1 tablespoon of flour and kn...
Read more